Flush eyes with water for 20+ minutes while lifting upper and lower eyelids. General Finishes Arm-R-Seal Oil Based Topcoat is an extremely durable varnish suitable for furniture, cabinets, millwork and case goods. WARNING: Keep out of reach of children. - Blue & White Living Home Decor, "Refinished in my new favorite green Westminster Green, by General Finishes and General Finishes Pitch Black Glaze added. Here are General Finishes recommended dry times for applying multiple coats of Gel Stain and Gel Topcoatover an existing finish. Seal-a-Cell is n unusual combination of oils and urethanes. It's little brother is already inside the house patiently waiting." EYE CONTACT: Remove any contact lenses. Let each coat dry 2 to 4 hours and sand in between with a 220 sanding pad. HIGH PERFORMANCEcan be brushed or sprayed. Dispose of in accordance with local fire regulations. Treat gently until the paint or topcoat have fully cured. I fell in love with this piece and wanted to give it a modern spin, but keep the natural beauty of the wood. Avoid wiping used brushes on the lid. This may be why the finish is performing differently on the leaves vs the table top. All General Finishes products were used. marine plywood). Life of Product Never give anything by mouth to an unconscious person.Prop 65 WARNING: DANGER COMBUSTIBLE LIQUID AND VAPOR. Arm-R-Seal topcoat is a beautiful, easy to use, and durable wipe-on finish making it the finisher's choice for almost 100 years. I've chosen black and dark shades of greys as a canvas for sparkling copper accents. Do not induce vomiting unless directed to do so by medical personnel. "I must say the transformation of our den has been wonderful with the addition of the hand hewn beam. Wipe along the wood grain using smooth, even strokes. I think the end result looks super sophisticated and classy. Contamination and Compatibility It depends on the type of use you plan for your butcher-block top and the look you want. The lid was refinished using Java Gel Stain (top). General Finishes cannot guarantee an ideal refinish when applying our products on top of or combined with another company's products or over surfaces that have been in contact with waxes, polishes or sprays containing contaminants such as silicone. This item: General Finishes Oil Based Gel Topcoat, 1 Gallon, Satin $99.95 ($0.78/Fl Oz) General Finishes Oil Base Gel Stain, 1 Gallon, Java $120.00 ($0.94/Fl Oz) Bates Foam Paint Brushes, 16 Pack, 2 Inch, Sponge Brushes, Sponge Paint Brush $6.95 ($0.43/Count) conversion varnish satin armor seal satin enduro clear poly satin enduro clear poly Application materials, such as brushes and towels, containing oil-based productsmay spontaneously catch fire if improperly discarded. - A Life Refurbished. Oil soaps and wax can also cause adhesion failures. *How Do I Remove Loose Fibers That Got Caught In My Last Coat of Arm-R-Seal? Do not store in unlabeled containers. Originally a low dresser from the 1960s, this piece is now versatile enough to fit in almost every room in your house. Arm-R-Seal rarely needs thinning due to its low viscosity. It may take two or 3 coats to get complete coverage. Apply 3 coats. Then a few months later it showed up for sale by another seller. Gel Topcoat is available in Satin. More, America's Leading Manufacturer of Innovative Water-Based Wood Finishes. Enduro Tintable 2K Clear Poly. The two cabinet doors were cracked as well so new ones were custom made and trim added to the front. Not only does the color of a finish change over time, so does the wood. The second layer of top coat will replace the appearance of the first. Overall very happy with the outcome. General Finishes Orange Oil Furniture Polish, How to Mix General Finishes Conversion Varnish, Enduro Conversion Varnish Product Overview, Comparison of General Finishes Water-Based Top Coats, Exterior 450 Water-Based Topcoat Product Overview, Enduro Clear Poly Water Based Topcoat Product Overview, 4 Reasons to Switch to Water-Based Wood Finishes, GF as Seen In Green Building & Design Magazine, Satin (25-35), Semi-Gloss (50-60), Gloss (80+), 12-24+ hr raw wood, 72+ hr existing finish until non-tacky. Sand lightly with 220-320-grit sanding sponge. The base was sealed in High Performance Topcoat and the top was sealed with wipe on Gel Topcoat." She was thenpainted with GF Lamp Black on the body. This table was purchased in 1934 at a Stickley furniture store by my clients great grandmother for her daughter and husband, his grandma and grandpa, as a wedding gift. Strip, sand and refinish the table. - Paint and Hammer, "My awesome customer who recently purchased my black farmhouse buffet wanted me to refinish her dining room table to match. If in doubt, wait longer.Increase dry time if: Cure Time Before Use The use of a screwdriver can disfigure the rim and lid, impairing a complete seal. RAW WOOD: 3 coats are recommended for this product. Can Oil & Water Finishes be Used Over One Another? Decrement Qty. If you choose to spray, use very thin coats and watch for runs (large drips that run down the side of your project). The frame was chalk painted using Annie Sloans Paris Grey. She's another beauty! Urethane topcoats are thin and the flatting agents used to create flatter sheens settle quickly to the bottom of the can. Remove dust with a vacuum,tack cloth or clean water dampened rag before re-coating. Dry times based on ideal conditions:70F/21C; 50% humidity. Exception: We have successfully cleaned with Clorox wipes for occasional cleanups. She was given a good sanding and cleaning and then stained with GF Salem from top to bottom. *How Do I Correct the Haze That Appeared When I Applied Gel Satin Topcoat Over 3 Coats of Gel Stain?*. How wonderful it will be Stephen Massman shared this beautiful custom-built murphy bed in cherry and cherry plywood! General Finishes Arm-R-Seal Oil Based Topcoat, 1 Quart, Satin Visit the General Finishes Store 2,144 ratings $4195 ($1.31 / Fl Oz) Size Name: 1 Quart 1 Gallon 1 Pint 1 Quart Color: Satin Arm-R-Seal topcoats are made with only the highest quality urethane resin These topcoats are extremely durable and long lasting It needed a lot of restoration work and love and patience. General Finishes Arm-R-Seal Oil Based Topcoat, 1 Pint, Gloss Visit the General Finishes Store 2,144 ratings $2795 ($1.75 / Fl Oz) Size Name: 1 Pint 1 Gallon 1 Pint 1 Quart Color: Gloss Arm-R-Seal topcoats are made with only the highest quality urethane resin These topcoats are extremely durable and long lasting Water Based Wood Stains, Dye Stain and Pre-Conditioners. The few remaining bubbles will typically disappear within moments. Protect your workspace with a tarp, your hands with gloves, and your clothes with an apron. This item: General Finishes Arm-R-Seal Oil Based Topcoat, 1 Pint, Satin $39.99 Bates- Foam Paint Brushes, 16 Pack, 2 Inch, Sponge Brushes, Sponge Paint Brush, Foam Brushes, Foam Brushes for Painting, Foam Brushes for Staining, Paint Sponges, Foam Sponge Brush $6.95 ($0.43/Count) General Finishes Oil Base Gel Stain, 1/2 Pint, Antique Walnut These 1970's Heritage side tables were freshened up with GF Chapin Gray Chalk Style Paint, Java Gel Stain, & Burnt Umber Glaze Effects by Suzanne Bagheri - The Painted Drawer Collection. If you notice a run, immediately wipe or brush it out. Frozen and heat-damaged product cannot be revitalized. Doesnt she exhibit natural beauty and warmth? "This little beauty needed a lot of work but had great bones. Hello soft and natural wood tones. . Avoid placing heavy objects onsurfaces that have not completely cured. Application materials, such as brushes and towels, containing oil-based productsmay spontaneously catch fire if improperly discarded. Bloxygen is an argon gas system that prevents oxygen and moisture from hardening leftover product. It has a lovely matte finish that soaks into the wood and is an excellent protectant for wood surfaces that come in contact with food. Remember, every species of wood is different; every tree is unique and will have a varying effect on the finished result. Serendipity Refined says, "Java Gel Stain and Gel Topcoat: My "go to" products for professional looking results on furniture makeovers as well as new wood.". George Baumgartner refinished this lovely oak desk using one coat of General Finishes Brown Mahogany Gel Stain topped with three coats of Gel Topcoat Satin. You can lightly buff with 0000 steel wool and General Finishes Orange Oil Furniture Polish - nothing too aggressive. Spills General Finishes Arm-R-Seal Urethane Top Coat, Gloss Rating: (101) Starting At: $2199 Add to Cart Bloxygen Gas for Preserving Unused Finishing Materials Rating: (53) $1399 Add to Cart General Finishes Orange Oil Rating: (25) $2099 Add to Cart General Finishes Gel Stain, Antique Walnut Rating: (75) Starting At: $2199 Add to Cart Seal-A-Cell Clear for decades has served craftsman as the best way to get that "natural" look on beautiful woods that aren't to be stained. Buttermilk Chalky Paint table base To accelerate dry time in humid conditions, work in a space with good ventilation and air movement. Avoid temperatures below 50F/10C or above 80F/26C. If in doubt, wait longer.Increase dry time if: Cure Time Before Use The night tables were re-stained with General Finishes Java Gel Stain. The veneer on topwas cracked and needed to be removed. ), Half-Pints, Pints, Quarts, Gallons, 25-40 sq.ft./half pint, 50-75 sq.ft./pint, 100-150 sq.ft./quart, 400-600 sq.ft./gallon. She looks black but this one is a custom colour of General Finishes Coastal Blue and Lamp Black which turned out to be a dark navy colour. This project however was not without it's trials and tribulations. Unfortunately, even though you sanded the table down to raw wood, sanding alone will not remove this type of contamination. These contaminants will not harm the finish, but they accumulate on surfaces and dull the original luster. Can't get enough of the rich, dark tone of this table top! Decant the amount of Arm-R-Seal you will need into a foil covered bowl or paper cup and reseal the can right away. If you want to change the sheen, you can re-coat with a different sheen over top. Says Jane, "Love love love your paint! Every minute the can is open, the stain is curing. Website Catalog This one had seen better days; the old veneer needed to be removed and replaced and I chose this beautiful mahogany piece, stained in American Walnut Liquid Oil Based Stain, to match the decor in my customer's home. (Add more time with subsequent coats. Avoid heavy pressure & back-brushing. So I cleaned it really well, lightly buffed with fine sand paper and added a coat of General Finishes Light Oak Oil Based Wood Stain. Oil-basedproductsstart to harden and cure when exposed to oxygen. - Blue & White Living Home Decor. The liquid creates a seal around the lid when stored upside down, preventing air from getting in. Seal-A-Cell helps control the penetration and dark spots." As topcoat is used, theempty space in the can is filledwith air, furtheringthe curing process. Wipe on with a lint free cloth, natural bristle brush, foam brush, or paint pad applicator. I then tried a product Ive never used before but have heard great things about, the General Finishes Gel Topcoat in Satin. Avoid excessive exposure to direct sunlight, high temperaturesor high humidity. To be safe, always plan on a long dry time. I really love it. The unique oil and urethane resins provide deep penetration into the substrate and forms a hard, tough, beautiful finish resistant to household chemicals, water and mar. Do NOT rush the dry times!Inadequate dry time can trap moisture & cause clouding. I could have painted it but sometimes you just need listen to the piece. *Why did my remaining Arm-R-seal thicken in the can? My clients chose General Finishes Antique White with Candlelight stain and a satin finish to refinish this piece. Whatever your application method, apply 3 to 4 layers of topcoat. Remove dustwith a water-dampened cloth. General Finishes High Performance Water-based Top Coat Satin, Quart Item #82321. Use appropriate containment to avoid environmental contamination. clear wax / Gf Gel Topcoat. Prevention Dry 12-24+ hours between coats when applying over raw or newly stained raw wood, and dry up 72+ hours between coats when working over asealed surface. Avoid placing heavy objects onsurfaces that have not completely cured. The more layers of finish there are on a project, the longer it takes to dry. Sealed with General Finishes Gel Topcoat." Will cover 100 sq. General Finishes cannot guarantee an ideal refinish when applying our products on top of or combined with another company's products or over surfaces that have been in contact with waxes, polishes or sprays containing contaminants such as silicone. Finished with General Finishes Seal-A-Cell and Arm-R-Seal products." Painted in General Finishes Gulf Stream Blue with General finishes Antique Walnut Gel Stain and Gel Topcoat." For more information go to, Satin & Semi-Gloss:This product can expose you to Benzene, which is known to the State of California to cause cancer and birth defects or other reproductive harm. The grain that came out just made my heart so excited. It is lightly distressed on the edges and sealed with Annie Sloan white wax, clear wax, and black wax for shading. - The Shabby Peacock. This might be the perfect piece for you! I applied enough to make it look wet, let it dry and applied another coat! How about a vintage liquor cabinet. Oil-basedproductsstart to harden and cure when exposed to oxygen. See our video: Tips for Storing Leftover Finishes "A few handmade items stained with General Finishes Antique Walnut Gel Stain. All NEW Liquid Oil Wood Stain color in Mocha. The tabletop was stained in General Finishes Candlelight Oil Based Stain and I used Arm-R-Seal oil based topcoat for a durable finish. Never use any water-based topcoat with long oils such as Danish, Tung or Linseed. "This beautiful bar is one of three Art Deco pieces that belonged to my clients grandparents. Optionally, if you want a flatter sheen, put down 2 coats of semi-gloss, followed by satin. Decant leftovers to a smaller, properly labeled container when thefinish is almost used up to reduce the volume of oxygen inthe container. This projectis a combination of a tile top table and a portable coaster. Regular Cleaning and Maintenance. Stondeck traffic coating solutions can be customized for increased durability, rigidity, moisture resistance, slip resistance and UV stability. I used all General Finishes products for this one. Get all the details of this project at http://www.dragonflyandlilypads.com/2015/09/my-swheat-table-flip.html, "Wanted to share a table I just did for a customer. 1 Tinting FAQ Can I Mix GF Milk Paint into Exterior 450 Topcoat To Tint The Final Coat? The woods used are Purple Heart, Cherry, Olivewood, Mahogany, Padauk and Walnut. Milk Paint is durable as a stand-alone finish on low to medium-wear surfaces. However, dried runs can be difficult to remove. Exception: We have successfully cleaned with Clorox wipes for occasional cleanups. Mel & Mar Creations restyled this vintage cabinet with Lamp Black Milk Paint and Gel Topcoat with light distressing. Being my first time replacing an entire veneer top, I was definitely intimidated but I learned so much along the way. Clean up water, alcohol and food spills in a timely manner and use placemats & coasters toprotect the finish. Dry-time to re-coat is 24 hours. Thesecan damage furniture and finishes. The arrows were painted with General Finishes Milk Paint in Driftwood and Coastal Blue.". If you intend to prep or chop food General Finishes Butcher Block Oil should be applied. Simply wipe on, allow 5 minutes to penetrate and wipe off the excess. Dry times based on ideal conditions:70F/21C; 50% humidity. Tips to ensure your Arm-R-Seal remains in great working condition: GF has two products that would work well. You can also sandwell and re-coat. It really makes the grain stand out!" Satin Topcoat has been a long-time favorite finish of woodworkers, with a heavy-duty oil-and-urethanebase that produces a beautiful, hand-rubbed look. I'm calling it 'Farmhouse Chic.' If it is a statement piece and not intended for high use, almost any finish would work. My aim when working on a piece of furniture is never to make it look ' "This antique 1940's era solid wood Duncan Phyfe style dresser has been hand painted in a beautiful aqua color for a bright, fun new look. Oil-based topcoats and ENDURO-VAR will amber over time. When I looked for signs of craftsmanship I found out that it was built in Yugoslavia, which I found interesting and made it even more special to refinish! Lightly sand with 320-grit sandpaper. HARMFUL OR FATAL IF SWALLOWED. The favorite of all gel topcoats, the heavy-duty oil-and-urethane base produces a beautiful, hand-rubbed look Oil Based Wood Salad Bowl Finish Wood Bowl Finish is a durable, oil-and-urethane oil-based finish designed for use on decorative wooden bowls, salad bowls and turnings Need to match something specific? Apply directly to stained surface. Keep lid closed while working. Do not store product in an attic, garage, in direct sunlight, or next toignition sourcewith heat and flames such as a furnace. Dry-time to touch is 8 hours. All wood projects require preparation sanding before clear coating with a topcoat. Applied 2 coats of Ash Gray Gel Stain with disposable shop cloths (the blue ones). Wash out mouth with water. Alternatively, place a flat piece of wood over can lid and firmly pound shut. I love leaving the best parts of the original woodwork so i left old intarsia around the edges and i refreshed the top of the piece by applying general finishesmaple woodstain. America's leading manufacturer of innovative water-based finishes. This curvy side table was refinished with GF Prairie Wheat Gel Stain and Gel Topcoat. Butcher Block Oil is a maintenance product that should be reapplied over time. Arm-R-Seal is oil based and will amber. Keep container tightly closed when not in use. I benefited from your educationnal videos on your YouTube channel. - Sage Furnishings. Black Gel Stain, Gel Top Coat and a little gold gilding wax were great choices for this piece. The following best practices will increase the life of your product: Cure First It was sealed with our favorite topcoat, GF High Performance water based Topcoat in Satin. We replaced the hardware, several of the original knobs were broken or completely missing, to a more modern champagne gold that turned out to be the perfect match for We absolutely love the transformation of our latest flip. Lamp Black Milk Paint for the body, High Performance Topcoat in flat for sealing, Antique Walnut & Nutmeg Gel Stains for the top, followed by 3 coats of the Gel Urethane. Learn the differences between our Wood Stains and Dyes here: http://bit.ly/1vtZolo, Rehab to Fab says, "This solid oak chest screamed make me new again. Sand lightly with a used 220 sanding PAD to knock down the original finish before re-coating. Top Coated WIth General Finishes Wipe On Poly. Loving gel stain in Candlelite! Stained with General Finishes Pecan and finished in General Finishes Arm-R- Seal Semi-Gloss for protection and that beautiful shine. Do not swallow. When working with a satin sheen, apply a liberal amount of product, and avoid pressure and back-brushing. This table top was sanded down and restained with Larry Webb has created the bench portion a beautiful built-in cubby. Avoid excessive exposure to direct sunlight, high temperaturesor high humidity. This Ginkgo Biloba inspired bureauwas build around contrasts: matt & shine, dark & bright, classic & modern.